Elbow Connector with Test PointThe 262LR-C5240 is a 25kV 200 Amp, Loadbreak Elbow Connector with Test Point, .805 inch – 1.060 Inch Cable Insulation Diameter, 1/0 Stranded Wire Size, Bi-Metal Compression Lug. The Elastimold® 262LR Elbow Connector is a fully rated 28kV, 200 Amp Class loadbreak connector. It includes provisions for energized operation using standard hotstick tools allowing loadmaking/loadbreak operation and a visible disconnect. It has a standard interface for connecting to 28kV, 200 Amp bushing inserts, junctions and operating accessories. The 262LR is designed for connecting to and operating 28kV Class, 200 Amp distribution apparatus.
39121421 Electrical connector assembly
4586 Electrical connector assembly
Loadbreak Elbow Connector with Test Point
28kV, 200 Amp Loadbreak elbow. Fully shielded, fully submersible molded rubber housing. 100 percent peroxide-cured construction includes insulation and conduction. Wide cable range with minimum number of sizes. Long bi-metal compression lug is standard. Non-corrosive capacitive test point.
200 kV, 200 Amp
ANSI/IEEE Standard 386
9.03 inch (299.4mm) X 8.20 inch (208.3mm) not including probe, 2.86 inch (72.6 mm) diameter.
1/0 Stranded/Compressed, 2/0 Solid/Compact
Housing – EPDM Rubber
Yes, EPDM Rubber
-20 Degrees C to +65 Degrees C
All Weather Conditions
1 Elbow connector housing, 1 compression lug, 1 probe, 1 probe wrench, 1 tube of lubricant, 1 crimp chart, 1 V.D. Cap-peroxide, 1 installation instructions sheet.
Outer Dimensions (inches)
1 lbs. Each
2.35 lbs. Each